|
 |
|
High Speed 3D Profile Scan Camera
 |
 |
| Sensor Specifications |
| Sensor resolution: |
1280 x 1024 pixels |
| Pixel size: |
12µm x 12µm |
| Dynamic Range: |
59dB |
| Digitization: |
10Bit |
| Shutter: |
Global snap shot shutter (interleaved and sequential)
and rolling shutter |
| Sensitivity |
10700 LSB/(μJ cm2) @ 550nm |
| Sensor Algorithm |
Image, Profile-MAX, Profile-TRSH, Profile-COG |
Length of profile
in 3D-mode |
1280 pixels |
Typical profile speed depending on number of sensor rows:
Height resolution can be increased by using Profile-TRSH (1/2 pixel) or Profile-COG-(1/16 pixel) without loss of speed |
| Sensor Rows |
Profile Speed (Hz) |
1024
256
128
32
16
|
450
1800
3600
14400
28800
|
|
| Max. Frame Rate for image (full frame) |
61fps with 40Mhz Camera Link™ - pixel clock (2 Tap mode)
76fps with 50Mhz Camera Link™ - pixel clock(2 Tap mode) |
| Max. number of sensor AOIs: |
8 |
| Interface Specifications |
| Digital I/O’s and external synchronisation signals (MDR14 connector) |
2 inputs, 2 outputs, opto coupled output, Inputs configurable as image- or profile trigger signal, tick divider and direction evaluation |
| Video output: |
CameraLink™(Base) |
| Illumination Interface (5-pin M9 connector): |
Simple on/off control of laser |
| Connections: |
| Digital I/Os: |
2 inputs, 2 outputs, opto coupled output, Inputs configurable as image- or profile trigger signal, tick divider and direction evaluation |
| External synchronisation: |
RS422 resolver interface with A,/A,B,/B inputs and digital inputs for trigger function |
| Supply voltage: |
7 - 24V |
| Power consumption: |
< 3,5W |
| Optical system: |
C-Mount / F-Mount for 1" lens |
| Size: |
72mm x 72mm x 57.4mm (C-Mount) x 86,4 (F-Mount) |
| General: |
| Weight: |
330g (C-Mount) / 400g (F-Mount) |
| PC requirements: |
CameraLink™ board with base connector |
| Operating systems: |
Windows 98, WIN NT, 2000, XP |
| Software environment: |
Configuration tool C3-Explorer
C3Lib-API with source code (C++)
Compatible with standard image processing libs, e.g. CVB, HALCON, MIL, IFC, SAPERA, MULTICAM,
NI-IMAQ, LABVIEW, MATLAB etc |
Optional Accessories
The moviSCAN 3D sensors are available in different configurations; including a board only version for high volume OEM applications, a compact sensor with industrial housing, a Scheimpflug adapter, screw terminal connector and SDK.
Additional Accessories:
C3-I/O-Kit: |
Connection kit for DIN rail assembly with camera-I/O cable and power supply |
C3-Explorer |
Configuration and recording software for all cameras in the C3 series |
|
|
|
|
|
|
