FLIR "Thermovision" Thermal Imaging Cameras

*Please describe what you want to accomplish:
Do You have any pictures of what you want to inspect? Drawings? Please upload:
*What is the dimensions of the part(s) you want to inspect?
Width: inch mm
Length: inch mm
Height: inch mm

*What is the desired working distance? inch mm

*Are there any concerns with where the camera, lens and illumination will be mounted? Yes No
If yes, please explain briefly:


*Which of the following categories best describe your application? (Select at least one)
OCR- Optical Charater Recognition 1D/2D Barcode Detection Flaw or Defect Detection Gauging / Dimentional Measurement Alignment Pattern Recognition Object Tracking Surveillance Diagnostic Imaging Non-Destructive Testing Scientific/Analytical Imaging Microscopy Flourescent Imaging Thermal Imaging/Infrared 3D Imaging
*Resolution Requirements I'm not sure
What is the smallest feature you want the system to be able to resolve? inch 1/1000 inch mm um

*Accuracy Requirements I'm not sure.
How accurate do you need the system to be? inch 1/1000 inch mm um

*Repeatablitiy Requirements I'm not sure.
The system should measure repeatability within +/- : inch 1/1000 inch mm um

*Part Presentation Please tell us how the part is or will be presented to the camera.
We have an existing part fixture that we want to use. We need help with the part fixture as part of the vision system.
Presenting the parts will reqire a motion system...
to move the parts to the camera for inspection. to move the camera to the parts.
The parts may shift in x-direction by approximately +/-
inch 1/1000 inch mm um
The parts may shift in y-direction by approximately +/-
inch 1/1000 inch mm um
The parts may shift in z-direction by approximately +/-
inch 1/1000 inch mm um

*I am interested in the following: Quote for Machine Vision Comonents only - I want to build the system myself Machine Vision/Control Software only Assistance with out project on a consulting basis Start up assistance/Training Turnkey System Proposal OEM - Original Equipment Manufacturer

How many systems do you need?

When do you need them?
Immediately 1 - 3 Months 3 - 6 Months 6 - 12 Months

*Approximate budget per system:
$0 to $5K $5 to $10K $10 to $25K $25 to $50K $50 to $75K $100k and greater

Contact Information
*First Name:
* Last Name:
Title:
* Company:
*Address 1:
Address 2:
*State:
*City:
*Postal ZIP:
County:
*Phone:	Ext.

* email:
Website:

About Us|Contact Us| Site Map

Tell us about your application: